Music ·
KORG launches phase8 companion: a free web editor with 32 steps and Euclidean rhythms for its acoustic synth

On November 17, 2026, KORG released phase8 companion, a free browser-based editor and librarian that connects over USB-C to the phase8, its steel-resonator acoustic synthesizer. The app expands the unit's 8-step sequences to 16 or 32, and adds Euclidean rhythms, random pattern generation, and automation drawn on screen. It arrives alongside phase8 system 1.3, which is required to use it and which fixes resonator noise, incomplete MIDI values, and external clock tracking. It's all in KORG's official announcement and on the app page.
For anyone who already owns a phase8, the news is twofold: more room to compose, and a firmware update that fixes things you notice live. For anyone who had it on their wish list, it's a sign that KORG keeps investing in a pretty unusual instrument within its catalog.
First, what the phase8 is
According to the official page, the phase8 is an eight-voice synthesizer that generates its sound with steel resonators that physically vibrate, controlled by electronics: envelopes, a sequencer, modulation, and analog wavefolding. KORG calls this Acoustic Synthesis. It comes with 13 chromatically tuned resonators, of which you mount eight at a time, and you can pluck, strum, strike, or mute them by hand. It has MIDI TRS, USB-MIDI, CV, Sync in and out, and eight program memories.
In other words: it's not a plugin or just another groovebox. It's an object that makes sound because a piece of metal is moving, and that's why the editor matters: what didn't fit on a panel of buttons now fits on a screen.
What phase8 companion does
KORG describes it as an editor that lets you build patterns on your computer and send them to the instrument to hear them through its resonators. According to the press release and the app page:
- 8, 16, or 32-step sequences. The unit's panel works with 8.
- Unquantized sequencing, to preserve the timing of a performance.
- Euclidean mode, which spreads hits evenly across the cycle.
- RANDOM with adjustable density and per-voice SKIPS control to create variations.
- Visual automation of DEPTH, RATE, MOD TYPE, AIR, SHIFT, envelope, and velocity, step by step.
- LIVE mode to pass changes between the app and the phase8.
- Librarian: you save patterns on your computer or in the unit's eight memories, which then work without a computer.
- Access to the global MIDI, CV, and SYNC settings, firmware updates, and factory reset.
- Interface in English and Japanese.
Peter Kirn, of CDM, reports that the app was created by Iarla Scaife (KORG Berlin) and Keisuke Nohara (Tokyo) and that it had already been shown at Superbooth in Berlin.

The requirements (and the catches)
The app lives at phase8.korg.com and there's nothing to install, but KORG lays out clear rules on its page:
- It works in Google Chrome on macOS and Windows, connected directly over USB-C. The press release mentions any browser with Web MIDI, but recommends Chrome.
- It doesn't work through an external MIDI interface or through the phase8's TRS MIDI jacks.
- You have to give the page permission to access MIDI devices in Chrome.
- It requires system 1.3 or later. If your phase8 has an earlier version, the app itself can update it.
- The phase8's auto power-off stays active while the app is connected: if the unit shuts off from inactivity, the connection is cut and you lose whatever you hadn't saved.
- Don't open it in two tabs at the same time, and save before closing the browser or navigating away.
One practical detail: the System Updater 1.3 page we checked only offers the installer for macOS 12 or later. If you're on Windows, the route KORG documents is updating from the app.

What system 1.3 fixes
According to the release notes, published on November 17, 2026:
- Fixes the resonator feedback sustain, which could introduce extra noise with ENVELOPE above 50% and AIR turned up.
- Fixes the irregular blinking of the TEMPO LED at power-on.
- MIDI note assignment changes (via global parameters or calibration) are now applied instantly, without restarting the unit.
- Fixes SHIFT programming from the app and recording over sequences created in it.
- Fixes SysEx program dumps that sometimes came out corrupted after power-on.
- The MIDI CCs the phase8 sends now do reach their maximum and minimum values.
- Better external clock tracking (SYNC IN, MIDI TRS, and USB-MIDI) when the signal has a lot of jitter.
What this means if you play live
My take: the clock and MIDI fixes are the ones that matter most if the phase8 is part of a set with other gear. An unstable clock coming from a laptop or a drum machine shouldn't knock it out of time so easily anymore, and if you use it to send CCs to another unit, you'll finally reach 0 and 127. Kirn writes in CDM that the resonator fix cures a behavior he himself had put up with in his set.
On the creative side, going from 8 to 32 steps changes the kind of phrases you can build: with 8 steps the phase8 tended to be a hypnotic loop; with 32 and per-voice Euclidean patterns, longer polyrhythms now fit, which suit techno and more experimental stuff better. And since patterns are saved on the unit, the computer is for prepping at home and doesn't have to go on stage.
What we still don't know: KORG only documents the app for macOS and Windows and doesn't mention tablets or phones, which is where an editor like this would be most tempting to use next to the unit.
I haven't tested it. Everything comes from KORG's official documentation, its press release, and coverage from CDM, MusicRadar, and Noise Harmony.
Sources
- New release - phase8 companion application is now available! — KORG (official announcement)
- phase8 companion: A web-based editor for phase8 — KORG
- phase8 System Updater 1.3, release notes — KORG
- KORG Introduces phase8 companion, a Free Web-Based Editor for phase8 — press release
- phase8 Acoustic Synthesizer — KORG official page
- Korg's phase8 acoustic synthesizer adds companion app, updated firmware — CDM
- Korg's Phase8 gets a free web-based editor — MusicRadar
- Korg phase8 Gets 32-Step Sequencing and Firmware 1.3 — Noise Harmony