Music ·

IK Multimedia revamps the iLoud Micro Monitor: now with ARC room correction built into the speaker

IK Multimedia announced the iLoud Micro Monitor 2 on November 19, 2026, the second generation of the ultra-compact studio speakers that, according to the brand itself, invented the "micro" monitor category in 2016 and sold more than 250,000 units in ten years. This is no minor touch-up: IK says it redesigned the cabinet, speakers, amplification and converters, and added what matters most in a small room: built-in ARC room correction, with the profile stored inside the speakers themselves. It's available for pre-order at US$/€349.99 per pair with a measurement microphone and starts shipping in December 2026, according to the official announcement.

If you produce in your bedroom, put together sets in an apartment, or need a reference that fits in your gig backpack, this matters for a simple reason: in an untreated room, the thing that lies to you most isn't the speaker, it's the room.

What the Micro Monitor 2 offers

The details come from the official spec sheet and the press release:

  • Bi-amplified two-way system with four Class D amplifiers: 50 W RMS total system power and 70 W peak.
  • New 3-inch woofer made of composite fiber and a 3/4-inch silk dome tweeter with a waveguide.
  • Frequency response of 49 Hz to 28 kHz (±2 dB) and bass extension down to 40 Hz at −10 dB, with a redesigned rear bass-reflex port.
  • Linear-phase digital crossover at 2.75 kHz. IK says the system stays phase-coherent within ±20° between 220 Hz and 23 kHz.
  • Inputs: analog RCA, digital audio over USB-C (plug your computer straight in, no interface needed) and Bluetooth.
  • Maximum SPL of 94 dB continuous and 105 dB peak, measured by IK with both speakers, in free field, at one meter.
  • Built-in tilting isolation base, 3/8" thread for a microphone stand and compatibility with wall or ceiling mounts.
  • Dimensions of 98 × 182 × 140 mm and 2.06 kg for the pair. In the box: active speaker, passive speaker, ARC microphone with clip, USB-C cable, 2-meter link cable and power supply.

Tabla que compara las especificaciones publicadas del iLoud Micro Monitor original y del Micro Monitor 2: respuesta en frecuencia, SPL, entradas, corrección de sala y precio

Room correction, now inside the speaker

This is what really changes the game. Before, if you wanted to correct your room, you paid for software or a separate box and left it plugged in. With the Micro Monitor 2, according to IK, the workflow goes like this: you measure with the ARC microphone and the ARC X software, ARC X generates a correction profile for that room, and that profile is stored in the speakers. From there, their internal DSP applies it, with no extra hardware during playback.

ARC X also offers a six-band EQ, custom voicings and emulation of other monitors and listening systems so you can check how a mix translates without switching speakers. For quick adjustments there's the iLoud Control app (iOS and Android), with voicings based on where you place the speakers (desktop, stand, next to a wall, in a corner), a four-band EQ and firmware updates.

Diagrama del flujo de corrección de sala ARC: medir con el micrófono, calcular el perfil con ARC X, guardarlo en las bocinas por USB-C y escuchar con la corrección aplicada por el DSP interno

IK also pitches it as a piece of larger systems: it can be combined with the iLoud Sub, other iLoud monitors and ARC Studio or ARC STUDIO+ to build stereo, multichannel or immersive setups.

Price and availability

  • US$/€349.99 per pair with ARC microphone.
  • US$/€299.99 per pair without the microphone, for those who already own a compatible ARC microphone.
  • Pre-orders open since November 19, 2026; shipments begin in December 2026.
  • Prices are before taxes. IK did not publish a price in Mexican pesos in the announcement.

What this means for producers and DJs

My take: the original was already the little speaker that lots of people use as a second reference or as a travel monitor. The 2 goes right after the weak spot of those scenarios, which is the location. A hotel room, an improvised booth or a desk pushed against a wall will bloat or swallow the bass, and with 3-inch speakers that matters even more. Having the calibration stored in the speaker itself means you measure once per place and forget about it.

Two practical details worth knowing before you drop the cash:

  • The analog input is RCA. The Micro Monitor 2 spec sheet doesn't list balanced inputs. If you're going to connect it to the booth output of a DJ mixer or to an interface with balanced outputs, you'll need a cable or adapter to RCA, and on long runs an unbalanced cable is more prone to picking up noise.
  • USB-C as an audio input is the most convenient for producing on a laptop without an interface, but think about your workflow: if you already record with an interface, you'll probably keep using RCA.

And an honest disclaimer: I haven't tested it. Everything above comes from IK Multimedia's announcement and spec sheet. Whether a 3-inch speaker "really" gets down to 49 Hz in your room depends on where you put it, and only independent tests will tell once shipments begin. MusicRadar, which covered the launch, also presents it as a complete redesign, but as of today there are no reviews with third-party measurements.

One minor inconsistency worth noting: the press release mentions Bluetooth with the SBC codec, while the product page talks about AAC and SBC. If the codec matters to you, confirm it when IK publishes the manual.

Sources

Check availability